1. Identificação | |
Tipo de Referência | Artigo em Evento (Conference Proceedings) |
Site | marte3.sid.inpe.br |
Código do Detentor | isadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S |
Identificador | 6qtX3pFwXQZsFDuKxG/z4jqK |
Repositório | sid.inpe.br/marciana/2003/08.05.09.56 |
Última Atualização | 2018:02.20.12.21.12 (UTC) marciana |
Repositório de Metadados | sid.inpe.br/marciana/2003/08.05.09.56.32 |
Última Atualização dos Metadados | 2018:06.06.04.04.43 (UTC) administrator |
Chave Secundária | INPE-9868-PRE/5447 |
Rótulo | self-archiving-INPE-MCTIC-GOV-BR |
Chave de Citação | BandeiraAnRaClAbMoUe:1999:LeTeCr |
Título | Lead-tin telluride crytal growth by VMS method in microgravity |
Formato | Papel |
Ano | 1999 |
Data de Acesso | 25 maio 2024 |
Tipo Secundário | PRE CN |
Número de Arquivos | 1 |
Tamanho | 180 KiB |
|
2. Contextualização | |
Autor | 1 Bandeira, Iraja Newton 2 An, Chen Ying 3 Rappl, Paulo Henrique de Oliveira 4 Closs, Humberto 5 Abramof, Eduardo 6 Motisuke, P. 7 Ueta, Antônio Yukio |
Grupo | 1 LAS-INPE-MCT-BR |
Afiliação | 1 Instituto Nacional de Pesquisas Espaciais. Laboratório Associado de Sensores e Materiais |
Nome do Evento | Workshop Brasileiro sobre Microgravidade, 1. |
Localização do Evento | São José dos Campos |
Data | 19-21 maio 1999 |
Editora (Publisher) | AEB |
Cidade da Editora | Brasília |
Páginas | 72-76 |
Título do Livro | Anais |
Tipo Terciário | Sessão Técnica Oral |
Organização | Programa Nacional de Atividades Espaciais (PNAE) |
Histórico (UTC) | 2015-05-18 14:44:01 :: administrator -> marciana :: 1999 2018-02-20 12:21:13 :: marciana -> administrator :: 1999 2018-06-06 04:04:43 :: administrator -> marciana :: 1999 |
|
3. Conteúdo e estrutura | |
É a matriz ou uma cópia? | é a matriz |
Estágio do Conteúdo | concluido |
Transferível | 1 |
Tipo do Conteúdo | External Contribution |
Palavras-Chave | crystals |
Resumo | Large homogeneous ternary alloy single crystals are a must for high performance optoelectronic devices such as diode lasers and infrared detector arrays. One practical choice for infrared detectors and semiconductor lasers in the wavelength range of 5 to 12 pm is the narrow band-gap semiconductor Pb1-x SnxTe. It is well known that, if D / v < L (where D is the diffusion coefficient, v the growth rate and L the crystal length), Bridgman growth in low gravity can result in crystals with more homogeneous axial concentration. This is due to the shift from convective growth on Earth to diffusion controlled steady-state (DCSS) growth in space. The only way to achieve DCSS growth on Earth is by reducing the growth aspect ratio (liquid height / ampoule diameter). In Bridgman growths it is possible to sustain a DCSS growth for a 50 mm length crystal if the bore of the growth ampoule is reduced to 2 mm. Another Earth bound method to avoid convection is the horizontal or vertical vapor-meltsolid (VMS) growth. In this method a thin stoichiometric liquid layer is formed at the interface between the solid and the vapor'. Such liquid layer, ahead of the crystallization front, has a thickness of the order of millimeters instead of the centimeters typical of Bridgman growth, reducing the Raleigh and Grashof number below critical values for vertical or horizontal growth respectively. While it is possible to find a method to eliminate buoyancy driven convection on Earth, very little can be done about surface-tension convection (Marangoni flow), which can give rise to axial and radial concentration inhomogeneities. When analyzing the ratio of Raleigh to Marangoni numbers (Bond number) in Bridgman growth in space, it is seen that even taking into account only the thermal gradient normal to the free surface, the surface tension driven convection is still an important factor for segregation. The same does not apply for VMS, where the Bond number is about 70 times smaller than that for Bridgman. To grow a crystal by VMS in microgravity conditions will be an excellent way to evaluate the mechanisms that give rise to radial and axial concentration inhomogeneties on melt grown crystals. |
Área | FISMAT |
Arranjo | urlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Lead-tin telluride crytal... |
Conteúdo da Pasta doc | acessar |
Conteúdo da Pasta source | não têm arquivos |
Conteúdo da Pasta agreement | não têm arquivos |
|
4. Condições de acesso e uso | |
URL dos dados | http://urlib.net/ibi/6qtX3pFwXQZsFDuKxG/z4jqK |
URL dos dados zipados | http://urlib.net/zip/6qtX3pFwXQZsFDuKxG/z4jqK |
Idioma | pt |
Arquivo Alvo | 9868.pdf |
Grupo de Usuários | administrator |
Visibilidade | shown |
Detentor da Cópia | SID/SCD |
Permissão de Atualização | não transferida |
|
5. Fontes relacionadas | |
Unidades Imediatamente Superiores | 8JMKD3MGPCW/3ESR3H2 |
Acervo Hospedeiro | sid.inpe.br/banon/2001/04.03.15.36 |
|
6. Notas | |
Campos Vazios | archivingpolicy archivist callnumber copyright creatorhistory descriptionlevel dissemination doi e-mailaddress edition editor electronicmailaddress isbn issn lineage mark mirrorrepository nextedition notes numberofvolumes orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup readpermission resumeid rightsholder schedulinginformation secondarydate secondarymark serieseditor session shorttitle sponsor subject tertiarymark type url versiontype volume |
|
7. Controle da descrição | |
e-Mail (login) | marciana |
atualizar | |
|